SBG233
Flow meter with integrated backflow prevention and
display
SBG12IF0FRKG
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SBG233-02 — 06.04.2021 —
Product characteristics
Number of inputs and outputs
Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range 0.5...25 l/min 0.03...1.5 m³/h
Process connection
threaded connection G 1/2
Application
Special feature
Gold-plated contacts
Application
for industrial applications
Media
water; glycol solutions; coolants; oils
Note on media oil 1 with viscosity: 10 mm²/s (40 °C)
oil 2 with viscosity: 46 mm²/s (40 °C)
Medium temperature [°C]
-10...100
Pressure rating [bar]
40
Pressure rating [Mpa]
4
MAWP (for applications
according to CRN)
[bar]
40
Electrical data
Operating voltage [V]
18...30 DC; (to SELV/PELV)
Current consumption [mA]
< 50
Protection class
III
Reverse polarity protection
yes
Power-on delay time [s]
< 3
SBG233
Flow meter with integrated backflow prevention and
display
SBG12IF0FRKG
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SBG233-02 — 06.04.2021 —
Inputs / outputs
Number of inputs and outputs
Number of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs
2
Output signal
switching signal; analogue signal; frequency signal; IO-Link; (configurable)
Number of digital outputs
2
Output function
normally open / normally closed; (parameterisable)
Max. voltage drop switching
output DC
[V]
2
Permanent current rating of
switching output DC
[mA]
150; (per output 2 x 200 (...60 °C); 2 x 250 (...40 °C))
Switching cycles
(mechanical)
10 million
Number of analogue outputs
1
Analogue current output [mA]
4...20
Max. load [Ω]
500
Short-circuit protection
yes
Overload protection
yes
Frequency of the output [Hz]
0...10000
Measuring/setting range
Measuring range 0.5...25 l/min 0.03...1.5 m³/h
Display range 0...30 l/min 0...1.8 m³/h
Resolution 0.1 l/min 0.01 m³/h
Set point SP 0.2...25 l/min 0.01...1.5 m³/h
Reset point rP 0...24.8 l/min 0...1.49 m³/h
Frequency end point, FEP 1.7...25 l/min 0.1...1.5 m³/h
In steps of 0.1 l/min 0.01 m³/h
Frequency at the end point
FRP
[Hz]
10...10000
Measuring dynamics
1:50
Temperature monitoring
Measuring range [°C]
-10...100
Display range [°C]
-32...122
Resolution [°C]
1
Set point SP [°C]
-9...100
Reset point rP [°C]
-10...99
In steps of [°C]
1
Frequency start point, FSP [°C]
-10...78
Frequency end point, FEP [°C]
12...100
Frequency at the end point
FRP
[Hz]
10...10000
Accuracy / deviations
Flow monitoring
Accuracy (in the measuring
range)
± (4 % MW + 1 % MEW); (Q > 0,5 l/min; medium and operating temperature: +22 °C ± 4K)
Repeatability
± 1 % MEW
SBG233
Flow meter with integrated backflow prevention and
display
SBG12IF0FRKG
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SBG233-02 — 06.04.2021 —
Temperature monitoring
Temperature drift
0,029 °C / K
Accuracy [K]
3 K (25°C; Q > 1 l/min)
Response times
Flow monitoring
Response time [s]
0.01
Damping process value dAP [s]
0...5
Damping for the analogue
output dAA
[s]
0...5
Temperature monitoring
Dynamic response T05 / T09 [s]
T09 = 120 (Q > 1 l/min)
Software / programming
Parameter setting options
hysteresis / window; normally open / normally closed; switching logic; current/frequency
output; medium selection; damping for the switching output / analogue output; display
can be rotated and switched off; standard unit of measurement; process value colour
Interfaces
Communication interface
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9 CDV
Profiles
Smart Sensor: Process Data Variable; Device Identification
SIO mode
yes
Required master port type
A
Process data analogue
2
Process data binary
2
Min. process cycle time [ms]
5
Supported DeviceIDs Type of operation DeviceID
Default 561
Operating conditions
Ambient temperature [°C]
0...60
Note on ambient temperature medium temperature < 80 °C
medium temperature < 100 °C: 0...40 °C
Storage temperature [°C]
-15...80
Protection
IP 65; IP 67
Tests / approvals
EMC DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance DIN EN 60068-2-27 20 g (11 ms)
Vibration resistance DIN EN 60068-2-6 5 g (10...2000 Hz)
UL approval UL Approval no. I005
Pressure Equipment Directive
Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical data
Weight [g]
750
Materials
stainless steel (1.4404 / 316L); PBT+PC-GF30;
PBT-GF20; PC; brass chemically nickel-plated
