ZZZVZLWFKHVVHQVRUV]IFRP
Page 1 of 2 Last update 2016-07-12; specifications subject to change without notice.
Linear Position Sensors
LIN Sensors – Kit with magnet
Thin, programmable, non-contact magnetic position sensors
with dual outputs available
Description
The LIN Series sensors are non-contact linear position sensors with one or two independent outputs. The sensors operate through the
use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output
(ratiometric to the input voltage) corresponding to a linear displacement of the actuator magnet.
The included actuator magnet is specifically paired to the sensor and is required to assure proper operation. Other magnets may yield
less than optimal performance.
Features
Typical Applications
x Easy setup and robust monitoring with M4 screws
x Dual independent (redundant) outputs assure high reliability
x Custom programming available for: range, slope, PWM output
x No mechanical interface means no parts to wear out or jam
x Comes with 20 AWG 305 mm (12”) discrete wire leads
or harness
with connector
x RoHS Compliant
x IP68*
x Suitable for wide air gap applications
x Compliant to industrial/automotive EMC/EMI/ESD directives
x Hydraulic valves
x Hydraulic controls
x Electric drives
x Pneumatic controls
x Zero-contact encoder alternative
x Gear selection / shifting position
Environmental Specifications
Operating Temperature
-40
ͼ
C to 140
ͼ
C (-40
ͼ
F to 284
ͼ
F)
Ingress Protection
IP68*
*Contact ZF for details on testing conditions
Electrical Specifications
Input
Supply Voltage
Reverse Battery Protection
5.0 VDC ± 10%
Output Signal
0.5 – 4.5 VDC (with nominal input)
Input Current
8 mA typ., 10 mA max.
16 mA typ., 20 mA max.
Resolution
12 bit
Accuracy, overall
±2% Full scale
Output Linearity
±1%Full scale
Mechanical Specifications
Measuring Range
Up to 45 mm
Air Gap**
4.5 mm (0.18”)
Maximum Magnet Misalignment
2mm(0.08”)
**Output is calibrated to meet spec within air gap shown; any variation will affect performance
感算商城
ZZZVZLWFKHVVHQVRUV]IFRP
Page 2 of 2 Last update 2016-07-12; specifications subject to change without notice.
Typical Output vs. Linear Displacement (as percentage of input)
Dimensions mm (inches)
Products
Part Number
Output
Interface
LIN-11HAW1
Analog single
20 AWG x 305 mm (12") discrete
wires
LIN-21HAW1
Analog dual
20 AWG x 305 mm (12") discrete
wires
感算商城